Pickup for TIME3200/3202 Roughness Tester
TS100 standard pickup
TS100 standard sensor can measure plane and axis; when measuring the inner surface of a hole, the minimum diameter of the hole is 5mm, and the maximum depth is 22mm.
TS110 for curved surface
The TS110 curved surface sensor can measure the surface of convex and concave curved workpieces with a radius of curvature greater than 3mm. It can be used with tooling.
TS120 for small hole
TS120 small hole sensor can measure the inner surface roughness of holes with a diameter greater than 2mm. The maximum hole depth is 9mm. It can be used with tooling.
TS130 for groove
TS130 groove sensor can measure the surface roughness of grooves with groove width greater than 2mm, groove depth less than 3mm or steps with height less than 3mm, and used with tooling.
TS131 for deep groove
TS131 deep groove sensor can measure the groove width greater than 2mm and groove depth less than 10mm; or the surface roughness of steps less than 10mm in height, used with tooling.
TS140 right-angle measuring mechanism
The TS140 right-angle measuring mechanism includes a right-angle sensor and a right-angle adapter rod; the probe moves laterally for measurement. It can measure grooves, crankshafts and other surfaces. The minimum groove width of the measured workpiece is 5mm. In addition, it can also measure steps with a height of less than 2.5mm. Use with tooling.