Digital Leeb Hardness Tester TIME®5150

TIME5150 hardness tester is the latest integrated Leeb hardness tester developed by TIME. Adopt D-type impact device. The new design has good portability and certain one-hand operability; it adopts a large-size high-contrast dot matrix OLED display, a new interface design, and flexible button operation to make the information display clear and convenient; the product has Bluetooth function.

TIME®1350 Phased Array Flaw Detector

16-channel 64-element phased array ultrasonic detection unit, capable of fully focused imaging.

Smart Leeb Hardness Tester TIME5370 Cloud Measurement

TIME Cloud Platform Leeb Hardness Tester TIME5370 Was Officially Launched. Automatic recording, real-time sharing, convenient service, opening a new era of smart testing. Data sharing anytime anywhere. Automatically record measurement data. Facilitate the traceability of quality control process. IP54 protection. One-key calling, quick submission of reports, service by your side.

Automatic Rockwell & Superficial Hardness Tester TIME6166/6167/6168

TIME6166/6167/6168 Rockwell hardness tester is an upgraded product of TH300/TH320. It adopts the 5.7-inch TFT touch screen and advanced intuitive UI design. The test force is automatically switched. The residual depth h is directly displayed according to the requirements of CANS and Nadcap certification. The test data can be exported to a U disk or an external printer for printing. It also supports data output to a PC with our software for data analysis.

Ultrasonic Hardness Tester TIME5630

TIME5630 ultrasonic hardness tester can nondestructively measure the metals and alloys with a minimum thickness of 3 mm. It can measure strip/plate workpiece, mold hardened layer, blade hardened layer, tooth surface hardened layer, flange edge, wheel, turbine rotor, thin plate, shaft and pipe, container, knife edge, welding part, etc.

Surface Waviness Tester TIME®3234

TIME®3234 is a portable stylus surface waviness tester, suitable for testing in workshop, laboratory, metrology center and etc.. It can measure roughness, waviness and primary profile. The test results can be displayed digitally and graphically on the LCD screen, or output to a printer. It can also connect to a computer for data analysis via the special software.

Ultrasonic Thickness Gauge TIME®2190 with A/B scan

TIME®2190 is the latest high-end ultrasonic thickness gauge developed by TIME Group Inc. It adopts pulse reflection principle, that is, the transducer sends ultrasonic pulses to travel through the test object and receives the reflection pulse from the backwall of the object. TIME2190 can nondestructively monitor the thickness of almost any material like metals, plastics, composites, fiberglass, ceramics, and glass with A scan/B scan. It is used to test the wall thickness and corrosion of various kinds of plates, pipes, boilers, vessels across industries like metallurgy, shipbuilding, machinery, chemical, aerospace, power, automotive, oil and gas, manufacturing and others.

Coating Thickness Gauge TIME®2605

TIME®2605 is a digital coating thickness gauge for non-destructive dry film thickness (DFT) measurement. It is equipped with various probes to test both ferrous and non-ferrous materials. This portable thickness gauge stands out due to its super high accuracy and large memory.

Surface Roughness Tester TIME®3221

TIME3221 Surface Roughness Tester is a high cost-effective surface measurement device. Separated driver makes it easier and more flexible to approach different surfaces. Touch screen. Measuring range reaches 400μm to test curved surface.

Portable Ultrasonic Flaw Detector TUD500

Portable Ultrasonic Flaw Detector TUD500 has better horizontal linearity and vertical linearity. Large VGA display makes it easy to read the data in any environment. Strong flaw inspection capability enables it to be used for a variety of applications.

Fully automatic Brinell hardness testing system introduction.

Fully automatic Brinell hardness testing system, hardness tester factory. Mainly realized steel gas cylinders, aluminum hydrogen energy cylinders, automobile engine cylinder heads, high-speed rail wheel sets, aerospace engine forged parts (titanium alloys, high-temperature alloys, aluminum alloys), shipbuilding heavy industry forged parts, and oil drill pipes Large components such as these are directly tested for Brinell or Rockwell hardness at the production site.

TIME6479 Online Brinell hardness tester measurement system.

TIME6479 Online Brinell hardness tester measurement system.

Year-end greetings from TIME GROUP INC

What is the difference between Leeb hardness tester and ultrasonic hardness tester?

Both Leeb hardness testers and ultrasonic hardness testers have their own advantages and limitations. Leeb hardness testers are portable, easy to use, and suitable for surface hardness testing. On the other hand, ultrasonic hardness testers provide accurate measurements for various materials and can measure thin coatings and subsurface layers. The UCI method, used with ultrasonic hardness testers, offers a specific approach for hardness testing. The choice between these two methods depends on the specific requirements of the application and the type of material being tested.

TIME5630 Ultrasonic Hardness Tester: An Introduction to UCI Testing

TIME5630 Ultrasonic Hardness Tester is a cutting-edge device that utilizes ultrasonic contact impedance (UCI) technology to accurately measure the hardness of materials. This article aims to provide an overview of the ultrasonic hardness tester and highlight its key features and benefits.

Roughness tester.

Roughness meter is also called surface roughness meter, surface finish meter, surface roughness detector, roughness measuring instrument, roughness meter, roughness tester and other names. It has the characteristics of high measurement accuracy, wide measurement range, easy operation, portability, and stable operation. It can be widely used in the detection of various metal and non-metal processing surfaces. This instrument is a pocket-sized instrument with an integrated sensor host. The hand-held feature makes it more suitable for use at the production site. The appearance design is sturdy and durable, with remarkable anti-electromagnetic interference ability, which is in line with today's new design trends.

How to Use TIME5100 Leeb Hardness Tester?

TIME5100 Leeb hardness tester is a versatile and user-friendly device used to measure the hardness of various materials. Whether you are a professional in the field of metallurgy or a quality control technician, understanding how to use this hardness tester is essential. In this article, we will guide you through the step-by-step process of using the TIME5100 Leeb hardness tester effectively.

How to Make DAC Curve with Ultrasonic Flaw Detector?

Ultrasonic flaw detectors are widely used in various industries for non-destructive testing and evaluation of materials. One important aspect of using an ultrasonic flaw detector is creating a DAC (Distance Amplitude Correction) curve. In this article, we will discuss the step-by-step process of making a DAC curve with an ultrasonic flaw detector.

TIME Vibration Tester

The field of vibration testing plays a crucial role in ensuring the reliability and performance of various products and systems. Vibration testers are instrumental in identifying potential faults, defects, and weaknesses in mechanical and electronic devices. In this article, we will explore the significance of vibration testers and their application in different industries.

Ultrasonic Thickness Gauge TIME®2110 measures on the test block.

TIME®2110/2113 is a basic and affordable ultrasonic thickness gage designed for non-destructive testing.