Phone: +86-10-62966798
Fax: +86-10-62980728
Email:
export@timegroup.com.cn

Copyright © 2002-2021 Beijing TIME High Technology Ltd. All Rights Reserved.Jing ICP B 06008674-4                                                                                                 

Surface Roughness Ra, Rz, Ry
$info.title
Ra-- in the sampling length L within the outline of the arithmetic mean of the absolute value of the offset Rz-- within the sampling length and average value of the five largest profile peak height and the average of the five largest outline of a deep valley. Ry-- between sampling length L within peak contour lines and contour line from the bottom.
TIME2113 tests on the standard blocks.
$info.title
TIME®2110/2113 is a basic and affordable ultrasonic thickness gage designed for non-destructive testing. It is light (weight 140g), easy to use and accurate. Despite its compact size, TIME®2110/2113 ultrasonic thickness gauge supports automatic non-linear compensation with computer software to correct the non-linear errors of the probe for the purpose of improving the accuracy.
TIME2190 THRU-COATING FUNCTION
$info.title
Ultrasonic Thickness Gauge TIME®2190 with A/B scan measures the step blocks through coating.
Evaluation of the nature of internal defects, causes of defects and preventive measures ⑤
$info.title
The echo height is large, the wave amplitude is wide, and there will be multiple peaks. When the ultrasonic flaw detector probe is translated, the reflected wave continuously changes in the amplitude of the reflected wave.
Evaluation of the nature of internal defects, causes of defects and preventive measures ④
$info.title
When the ultrasonic probe is translated, the waveform is relatively stable. When detecting on both sides, the reflected wave amplitude is different, and sometimes it can only be detected from one side.
Page up
1
2
...
9

Since the first Leeb hardness tester in China was developed by TIME Group Inc., we have been devoted to producing the best testing instruments for over 30 years. Now TIME is not only a reliable manufacturer of precision measuring equipments, but also an expert in providing solutions for a wide variety of industries. Some examples inlucde:

Surface Roughness Ra, Rz, Ry
$!info.title
TIME2113 tests on the standard blocks.
$!info.title
TIME2190 THRU-COATING FUNCTION
$!info.title
Evaluation of the nature of internal defects, causes of defects and preventive measures ⑤
$!info.title